GB17465.1 C6 Para testes conectores e soquetes de entrada de aparelhos

Gauge Type

Models/Specifications

Quantity

Maximum Withdrawal Force Gauges

Models:

 C2, C6, C8, C8A, C8B, C8C, C10, C14, C16, C16A, C18, C20, C22, C24

Specifications:

 Plug pins have maximum dimensions with tolerance of 0 -0.01mm, made of hardened steel, surface roughness ≤ 0.8μm, pin center distance tolerance +0.2mm, length conforms to standard tolerances, appliance inlet socket housing internal dimensions minimum value with tolerance +0.1mm.

14 pieces

Minimum Withdrawal Force Gauges

C6: (Φ2.32+0.01mm, 1.5N) - 1 piece

C6 Grounding Pin: (Φ3.1+0.01mm, 1.5N) - 1 piece

C10: (3.9+0.01×1.95+0.01mm, 1.5N) - 1 piece

C20: (4.9+0.01×1.95+0.01mm, 2N) - 1 piece

C20 Grounding Pin: (5.9+0.01×1.95+0.01mm, 2N) - 1 piece

5 pieces

Breaking Capacity Appliance Inlet Socket Gauges

Models:

 C2, C6, C8, C8A, C8B, C8C, C10, C14, C16, C16A, C18, C20, C22, C24

Specifications: 

Conform to standard leaflet requirements, plug pins made of hardened steel, rectangular pin ends rounded, round pin ends hemispherical.

14 pieces

Temperature Rise Appliance Inlet Socket Gauges

Models:

 C2, C6, C8, C8A, C8B, C8C, C10, C14, C16, C16A, C18, C20, C22, C24

Specifications:

 Plug pins have minimum dimensions with tolerance of +0.02mm, made of brass, pin center distance conforms to standards.

14 pieces

Connector Deformation Resistance Test Plate

Diagram 22:

 Used to check deformation resistance of the front part of connector in Diagram C7, equipped with connecting rod and 5N and 10N weights.

2 pieces

Contact Point Distance Gauge from Joint Face

Diagram 27: 

Used to check the distance from the joint face of the connector to the starting contact point.

6 pieces